20
2.
Thermostat
When the heater is switched on.
1.
Turn the thermostat knob in a clockwise direction to the max. position.
2.
Once the room temperature has reached the desired temperature, turn the
thermostat knob slowly in an anti-clockwi
se direction until a “click” sound
and that is the setting temperature. Now, the convector is switched off and
the indicator lights off.
3.
The product will automatically maintain the set temperature. It will switch on
when the room temperature is below and switch off it above the setting.
4.
The red indicator show that convector is switched on.
3.
Timer function 24h
1.
In the center of time there are two switch position.
2.
The position corresponding to the timer symbol switch the tiemr on and off.
3.
The Fan Hater will follow the set timings as determined by the segments
(see timer programming).
4.
If switch is in I postion, the timer will work but it will not power the product.
4.
Timer programming
Ensure that the switch is selected on timer position.
Turno the external ring of the timer clockwise till the real time is alligned
with the selecting arrow ( es. if the set is 20.00h, turn the ring till the
desired operative time has been reached).
When programmed the Fan Heater will operate every day with the
selected timings.
NOTE. The product must be always connected to main supply, the
switches on ON position and the Thermostat must to be active, to
ensure the product will operate.
If a continous operating is required, the switches must be selected in T
position.
To come back to operate with timer, select the switch on timer mode
again.
