28
09/2020 - EN
13 HOT AIR DUCTING
The kitchen is equipped with a centrifugal fan suitable for
channeling the air to neighboring rooms. As standard, the
air comes out of the grill located on the front, on the left of
the fi re door.
By rotating the fan it is possible to exit with a 60mm diameter
air ducting pipe from the back of the stove. Follow the
instructions step by step to rotate the fan.
Unscrew the 4 screws and remove the fan maintenance grille
Unscrew the 2 screws and remove the left side.
Unscrew the 4 screws and remove the fan housing with its motor
Unscrew the 3 screws and turn the motor to position 1 or 2
Repeat the reverse operation.
For ducting it is recommended not to exceed 6 meters of pipe and 3 90 ° bends, otherwise the hot air will lose eff ectiveness.
• Use 60 mm diameter pipes with smooth internal walls.
• If the pipes pass through cold walls, insulate the pipe with insulating material.
• In the outlet place a protective grid with large meshes with a minimum total net surface of 40cm 2.
• After 6 meters of pipe we can have a variable air fl ow.
CAUTION
Use heat-resistant pipes, maximum temperature 180 ° C. It is forbidden to use plastic pipes and derivatives..
Ventilation
environment
Ventilation
channeling
1- Room ventilation position
2- Ducting ventilation position
side cover
Left
Grid
maintenance
cooling fan
Fan holder cover
Air + engine
1
3
2
4
5
environment
1
2
1
1 2
