ENGLISH
ENGLISH
17
09/2020 - EN
8 INITIAL DISPLAY CONFIGURATION
When the stove is turned on, the display shows the operating status. During the initial start-up, the display shows
the stove model and the installed firmware release.
The stove must be powered using the ON/OFF safety switch located at the back; after a few seconds it is ready
for ignition.
The stove will modulate its power based on the set ambient temperature, which is detected by the probe on-
board the stove.
8.1 CONNECTION TO AN EXTERNAL THERMOSTAT
Function not active in this version.
9 CONTROL PANEL
A
D
F
B
H
C
E
G
I
A - SET User Menu
B - AUTO to enable the weekly programmer
C - ON/OFF and exit from Menu functions
D - Temperature s and menu functions
D - Temperature setting – and menu functions
F - Heating programme and menu functions
G - Heating programme setting – and menu functions
H - Remote control infra-red sensor
I - Alphanumeric 16x2 LCD Display
9.1 USE OF PANEL
Press SET (A) to open the user menu. Scroll the menu using the keys
and
.
To open the submenu, confirm using the SET (A) key.
1 - Set Date and Time
2 - Weekly programmer setting
3 - Thermostat mode
4 - Stove parameters
5 - Error log
6 - Language selection
7 - Fuel selection
EACH
IGNITION
EACH
WEEK
1
MONTH
1
YEAR (y)
BURN POT
X
ASH DRAWER
X
GLASS
X
ROOM FAN EXTRACTION GRILLE
X
BOILER
X
HEATING ELEMENT SLEEVE
X
EXHAUST MANIFOLD
X
DOOR AND BURN POT GASKETS*
X
FLUE DUCT*
X
FANS*
X
