Page
C-32
OPERATING INSTRUCTIONS
Document 57.0003.4200 - 03/2005
Handler with telescopic boom
Agrilift 625 - Telelift 2506
■
C-5.4
CHANGING THE ATTACHMENT
ATTENTION
Use only attachments directly manufactured or
recommended by Terexlift and detailed in the
“Optional attachments” section.
To change an attachment, operate as follows:
•
Drive to the place where you will release the
mounted attachment (when possible, a solid and
sheltered site).
•
Disconnect the quick connectors of the
attachment (if any), and connect the hydraulic
locking pipes of the attachments to couplings
A
.
•
Rest the attachment flat on the ground.
•
Pitch the attachment holding frame forward and
lower the boom to release the attachment upper
lock.
•
Move back with the machine (or with the boom)
and drive to the new attachment to be coupled.
•
Hold the frame pitched forward and hook the
upper lock of the new attachment.
•
Retract and raise the attachment some
centimetres. It will centre automatically on the
quick coupling frame.
•
Operate the control lever to lock the attachment.
CAUTION
After substitution, visually check the attachment is
correctly coupled to the boom, before operating
the machine. A wrongly coupled attachment may
result in damage to persons or things.
Summary of Contents for Agrilift 625
Page 2: ...Courtesy of Crane Market ...