Document 57.4402.8200 - 1
st
Edition 03/2007
INDEX
2
5
GYRO 4020 - 4518
TECHNICAL SPECIFICATIONS
Now the programme configuration is completed and this
procedure shall never be repeated.
The menu of the main page shows the functions which
can be changed.
When you launch the
WINSCOPE
programme and
select a menu field, the system will ask you to type in
your
User Name
and
Password
.
If you want to view the parameters without effecting any
changes, press the
Cancel
button.
If, on the contrary, you want to change some parameters,
you shall type in
3b6
in the User Name field and
4482
in the Password field and then confirm by pressing the
"
OK
" button.
In order to change the machine parameters, you
shall turn on the electronic control unit by turning
the relevant key to the ON position (this can also be
done without starting the diesel engine).
Check that the
WINSCOPE
programme is active
(Offline); if the programme is deactivated (Online), as
shown in the picture below, press on
C
.
In order to verify if the programme is running properly,
check the message in the box on the bottom left of
the window. If the message near “Connection Mode”
is TIMEOUT, there is no connection with the machine.
Check the reason of the disconnection and restart
WINSCOPE
.
C
