Document 57.4402.8200 - 1
st
Edition 03/2007
INDEX
2
45
GYRO 4020 - 4518
TECHNICAL SPECIFICATIONS
- Fault display
As already mentioned, when the
DEUTZ
or
LINDE
units detect an internal malfunction, they send an error
message.
The system activates the buzzer intermittently and the
display shows the corresponding error message.
If the operator presses one of the two buttons
MODE
or
MODE 2
, the buzzer stops sounding, but the displayed
message remains until the fault is rectified.
If an error is already present (also when the buzzer
stopped) and a second error triggers, the panel warns
of this second error by turning the relevant light on and
by activating the buzzer.
All pressent and active errors are alternate displayed
on the screen.
The system can display up to 10 errors. To view the
errors list, you can enter the
CONFIGURATION
menu
and select the item
VIEW ERRORS
.
If a second error triggers before the operator presses
button
MODE
or button
MODE 2
, the system store
the error in emory and doesn't display the relevant
message. Once the operator presses button
MODE
or
MODE 2
to stop the buzzer warning of the first error,
the second error is displayed on the screen after a few
seconds.
If there is at least an error when the machine is turned
on, the system activates the buzzer immediately
and intermittently and the relevant error message is
displayed.
If there are no errors, the system display the message
NO ERROR
which, after a few seconds, turns into the
maintenance interval.
- Initial check
When the machine is turned on, the system turns on
all the display pixels and the 15 warning lights for
one second so the operator can check the proper
operation.
Likewise, an audible signal allows to check the buzzer
operation.
