Document 57.4402.8200 - 1
st
Edition 03/2007
INDEX
GYRO 4020 - 4518
TECHNICAL SPECIFICATIONS
2
36
2.23 PLATFORM CALIBRATION
- CALIBRATING THE PLATFORM
1. Couple the platform.
2. Stabilise the machine.
3. Stop the engine.
4. Connect the plug on the platform to the power
socket on the boom and then turn the platform key
to the ON position.
5. Go back to the driving place and turn the dashboard
to the ON position and wait until the message "
FORK
PLEASE CONFIRM
" appears on the display and
then turn the road/jobsite/platform selector to the
"platform" position.
6. Wait until the machine recognises the platform
automatically and then press "
ENTER
" and type in
the password.
7. Press key
+
several times until displaying page 60
"
BASKET EMPTY
" and then press "
ENTER
" and
"
INDEX
". In this way, the tare weight value is sent to
the platform.
8. Press key
+
several times until displaying page 61
"
BASKET AC.
" and then press "
ENTER
" and, using
the "
INDEX
" key, go to the asterisk "
*
". Using the
"
+
" or "
-
" key, edit the known weight to be applied to
the platform (for instance, .70 corresponds to 700
kg) and then press "
ENTER
" once again.
9. Press key
+
several times until displaying page 62
“
BASKET LADEN
” and then load the known weight
indicated in point 7 and then press "
ENTER
" and
"
INDEX
".
In this way, the value of known weight is transmitted
to the platform for comparison.
10. Press key
+
several times until displaying a page
with the “
SAVE
” command, then press "
ENTER
"
and wait until the message "
DONE
" is displayed.
Wait for two minutes and then stop the engine of the
machine.
11. Now the platform is ready for operation.
