September 2017
Part No. 57.4400.9219
GTH-1256 AF
3-15
Section 3 • Scheduled Maintenance Procedures
B-2
Gear Box Oil Level
Genie requires that this procedure be performed
quarterly.
1 Stop the machine on a level ground and
engage the parking brake.
2 Clean level plug (B) all around.
3 Remove the plug (B) and check if oil is level
with the hole.
4 When necessary, add new oil through plug (B)
until it is level with the hole.
5 Re
fi
t and tighten the plug (B).
B-3
Check the Exhaust System
Genie requires that this procedure be performed
every 250 hours or quarterly, whichever comes
fi
rst.
Maintaining the exhaust system is essential
to good engine performance and service life.
Running the engine with a damaged or leaking
exhaust system can cause component damage
and unsafe operating conditions.
WARNING
Bodily injury hazard. Do not
inspect while the engine is
running. Remove the key to
secure from operation.
CAUTION
Bodily injury hazard. Beware of
hot engine components. Contact
with hot engine components may
cause severe burns.
1 Open the engine access cover.
2 Be sure that all fasteners are tight.
3 Inspect all welds for cracks.
4 Inspect for exhaust leaks - i.e., carbon buildup
around seams and joints.
5 Close the engine access cover.
CHECKLIST B PROCEDURES
B
