May 2015
82 GTH 4016 R - GTH 4018 R - GTH-5021 R Part No.
57.0009.0607
Second Edition - First Printing
Check the Engine Oil Level
Maintaining the proper engine oil level is essential
to good engine performance and service life.
Operating the machine with an improper oil level
can damage engine components.
Note: Check the oil level with the engine off and on
a level surface.
1 Check the oil level dipstick. Add oil as needed.
Perkins 854E-E34TA, STAGE III B (EU model)
Oil type SHELL RIMULA R4 L 15W-40
Perkins 1104D-E44T, STAGE III A
Oil type SHELL RIMULA R4 L 15W-40
Maintenance
Check the Hydraulic Oil Level
Maintaining the hydraulic oil at the proper level is
essential to machine operation. Improper hydraulic
oil levels can damage hydraulic components. Daily
checks allow the inspector to identify changes
in oil level that might indicate the presence of
hydraulic system problems.
1
Be sure that the engine is off, the frame is
level and the boom is in the stowed position.
2
Visually inspect the sight gauge located on the
left side of the hydraulic oil tank.
¤
Result: The hydraulic oil level should be
halfway in the sight gauge.
3
Add oil as needed. Do not overfill.
Hydraulic oil specifications
Hydraulic Oil type
GAZPROMNEFT HYDRAULIC HDZ 46
Diesel Fuel Requirements
Satisfactory engine performance is dependent
on the use of a good quality fuel. The use of a
good quality fuel will give the following result: long
engine life and acceptable exhaust emissions
levels.
The Stage III B diesel engine must be operated
using only Ultra Low Sulfur Fuel. The sulphur
content of this fuel must be lower than 15 PPM
Fuel
Perkins 854E-E34TA, STAGE III B (EU model)
Fuel Type Ultra Low Sulfur Fuel (ULSD)
Perkins 1104D-E44T, STAGE III A
Fuel Type
Diesel
Tank
205 L
54 gal