May 2015
Second Edition - First Printing
Part No. 57.0009.0607
GTH 4016 R - GTH 4018 R - GTH-5021 R 43
Inspections
Do Not Operate Unless:
R
You learn and practice the principles of safe
machine operation contained in this operator’s
manual.
1. Avoid hazardous situations.
2. Always perform a pre-operation inspection.
Know and understand the pre-operation
inspection before going on to the next section
.
3. Always perform function tests prior to use.
4. Inspect the workplace.
5. Only use the machine as it was intended.
Workplace Inspection
Fundamentals
The workplace inspection helps the operator
determine if the workplace is suitable for safe machine
operation. It should be performed by the operator prior
to moving the machine to the workplace.
It is the operator’s responsibility to read and remember
the workplace hazards, then watch for and avoid them
while moving, setting up and operating the machine.
Workplace Inspection Checklist
Be aware of and avoid the following hazardous
situations:
q
drop-offs or holes
q
bumps, floor obstructions or debris
q
sloped surfaces
q
unstable or slippery surfaces
q
overhead obstructions and high voltage
conductors
q
hazardous locations
q
inadequate surface support to withstand all load
forces imposed by the machine
q
wind and weather conditions
q
the presence of unauthorized personnel
q
other possible unsafe conditions
