Rev C
Instructions
Procedure
Part No. 219267
SmartLink Software Update
5
Platform Overload Option
(GS-3232 and GS-3246 models)
The previous Rev J software update may have
enabled the Platform Overload Option. This option
will be stored in memory and the Rev K software
will not disable. This procedure will verify that it is
disabled and instruct you how to disable this option
if it has been enabled.
1
Turn the key switch to the ground controls
position and pull out the red Emergency Stop
button to the on position at the platform
controls.
2
Press and hold the ground control scroll up and
scroll down buttons.
Ground Control Menu Buttons
1
Scroll down button
2
ENTER button
3
Scroll up button
4
ESCAPE button
5
LCD display
3
Pull out the red Emergency Stop button to the
on position at the ground controls.
Result: The ground controls LCD display will
show the following:
4
Release the Scroll Up and Scroll Down buttons
after the ground controller powers up.
5
At the ground controls, use the Scroll Up or
Scroll Down buttons to scroll to
Select Option
.
6
Press the Enter button.
7
Use the Scroll Up or Scroll Down buttons to
scroll to
Select Option Plat. Overload
.
8
Press the Enter button.
Result: The ground controls LCD display
shows the following.
