XM158 V1.0-NR
13
Movement Speed
With this function, you can select scan mode from 1 to 4.
Mic Sensitivity
With this function, the default is 70%, you can select the desired microphone sensitivity from 0 % to 99 %.
Service setting
Service Password
With this function, you can set the service password.
Fan Voltage
With this function, you can select fan voltage for high or low.
Attention: The model is not recommended when ambient temperature is higher than 15 Celsius degree.
Gobo speed
With this function, you can select GOBO speed for
quick or slow
, the default is slow.
Fans Control
With this function, you can set the speed of the running fans. The selections have Auto
、
high and low.
Display settings
Shut off time
With this function you can shut off the LCD display after 2 to 59 minutes. Turn the encoder in order to select the
desired shut off time.
Temperature C/F
With this function, Display the temperature for Celsius or Fahrenheit.
Initial effect
With this function, Display initial effect position.
Reset Default
With this function, you can select restore factory set for ON or OFF, the default is OFF.
Reset-functions
With this function you can reset the device via the Control Board. You can select the different reset functions by
turning the encoder.
Effect Adjust
Test function of each channel
With this function you can test each channel on its (correct) function.
Lamp adjustment
With this function, you can adjust the lamp more easily. All effects will be canceled, the shutter opens and the
dimmer intensity will be set to 100 %. With the individual functions, you can focus the light on a flat surface (wall)
and erform the fine lamp adjustment.
Calibrate values
With this function, you can calibrate and adjust the effect wheels to their correct positions. The password of calibrate
values is 050.
