background image

1

QNE/ QNES 

Thank you for purchasing Qlight’s products. Please read this user manual carefully 

prior to installation and operation to ensure safe and correct use.

Explosion Proof LED Signal/ Warning Light and Electric Sounder Combination

Safety Precautions for Explosion Proof Products

1. During wiring or maintenance, please completely turn off the power of the product. (Failure to follow this may lead to an electric shock.)

2. Do not install the product in locations that subjects it to excessive dust or water other than the conditions designated by the IP protection

    ratings indicated for each product. (Failure to follow these instructions may cause a fire to the product, electric shock, physical injury,

    malfunction or damage to the product.)

3. Do not alter or repair this product. If maintenance or repair service is required, please contact your local Qlight contact point.   

   (Failure to follow these instructions may lead to fire, electric shock, or product damage.)

4. Please apply the correct voltage to the product. (Failure to follow these instructions may lead to fire, electric shock, or product damage.)

5. When the product is applied to a condition that may impact lives or property, please make sure to have a double safety device. 

   (Failure to follow this may cause damage to property, fire, electric shock and loss of life.)

Precaution for Safety

Failure to follow the instructions below may cause a loss of life or serious physical injury. 

Please follow the instruction below to ensure safe and correct use of explosion proof products.

1. Explosion proof products should be managed according to explosion-proof regulations. Do not disassemble, assemble, alter or repair 

    the product arbitrarily.

2. The temperature rating of the product is the temperature the product will experience at the applied rated voltage and ambient 

    temperature indicated. 

3. Use cable glands that satisfy the product’s explosion proof grade and temperature grade.

4. Unused cable entries must be filled with material that meets the explosion proof grade and temperature rating. 

5. Before installing the product, please make sure all cautions indicated on the labels, packaging, and operation manual of the product are

    fully understood. 

6. Installation, maintenance and repair of the product must be performed by experts in the explosion proof field, or persons who have 

    received relevant training.

7. For safety, the product should be installed and operated in environments that avoid high temperature and high pressure.

8. Please follow general safety precautions and avoid installing the product in locations that may generate excessive heat.

9. When installing the product in places where chemicals are located, please make sure that the environment does not have two or more 

    incompatible chemicals mixed. For safety, please read the instruction manual carefully and be mindful of the chemical compositions 

    where the product is used. 

10. This product requires grounding.

1. Please remove any objects that can interrupt ventilation around the product. 

2. Please turn off the power of the product immediately if it fails to operate properly. 

3. Carefully wire the product according to each product’s specification. 

4. Please be careful in preventing chemicals such as thinner, benzene, etc. in contact with the surface of the product. 

5. Do not apply excessive force/impact to the product. 

6. Failure to follow any of the instructions above may cause malfunction or damage to the product, fire, and electric shock.

7. Static electricity may be generated by physical contact due to the surface characteristics of this product so please use a wet towel 

    or anti-static cleaner to remove the foreign substances on the product.

Precautions for Correct Use 

Failure to follow the proper instructions may cause damage to property, the product, or malfunction of the product 

that would void the warranty.

Please scan the QR code for more 

detailed product information.

www.qlight.com

60

40

50

40

45

40

66

Ex

Summary of Contents for QNE









Reviews: