KRB-5426c
-46-
Table 12-5 Setting items and display details of setting item screens (S-D-2
④
to ST-W-1)
(external anomaly protection setting)
Screen
number
Setting items and display details
Selection
Setting range
Remarks
Display
Item
S-D-2
④
Setting item selection switching
-
-
This screen is displayed when you press the [D] arrow
button once at the S-D-2
③
screen (shown on page 43).
Use the [U] or [D] arrow button to select a desired setting
item.
ST-V0
MODE
External anomaly
protection 1
mode setting
TRIP/ALARM/OFF
-
You can select one of the modes shown to the left by
pressing the [R] arrow button at this screen. Use the [U]
or [D] arrow button to switch the mode to be set.
ST-V-1
External anomaly protection 1
output setting item
selection/setting
-
-
Use the [U] or [D] arrow button to select the item to be
set, and press the [R] arrow button and then change the
output settings.
The setting procedure is the same as that described on
page 20.
RY1
External output
setting
ON/OFF
-
This setting item specifies whether to output to terminal
number 1.
RY2
ON/OFF
-
This setting item specifies whether to output to terminal
number 4.
RY3
ON/OFF
-
This setting item specifies whether to output to terminal
number 7.
RY4
ON/OFF
-
This setting item specifies whether to output to terminal
number 10.
ST-W0
MODE
External anomaly
protection 2
mode setting
TRIP/ALARM/OFF
-
This screen is displayed when you press the [D] arrow
button with “RY4” selected on the ST-V-1 screen. You
can select one of the modes shown to the left by pressing
the [R] arrow button at this screen. Use the [U] or [D]
arrow button to switch the mode to be set.
ST-W-1
External anomaly protection 2
output setting item
selection/setting
-
-
Use the [U] or [D] arrow button to select the item to be
set, and press the [R] arrow button and then change the
output settings.
The setting procedure is the same as that described on
page 20.
RY1
External output
setting
ON/OFF
-
This setting item specifies whether to output to terminal
number 1.
RY2
ON/OFF
-
This setting item specifies whether to output to terminal
number 4.
RY3
ON/OFF
-
This setting item specifies whether to output to terminal
number 7.
RY4
ON/OFF
-
This setting item specifies whether to output to terminal
number 10.