![Teracue ENC-400-HDM H.264 User Manual Download Page 91](http://html1.mh-extra.com/html/teracue/enc-400-hdm-h-264/enc-400-hdm-h-264_user-manual_1088253091.webp)
ENC-400-HDMI
™ H.264 Encoder
User Guide V 2.1
91
automatically stop recording on 4GB boundary for FAT file systems
Bugfix: /status/encoder/0/recording/active is set to no when recording is aborted.
Bugfix: Don’t overwrite existing files.
ENHANCEMENT: To prevent creation of files with length 0, start new recording only if there
are 256 blocks free on medium/filesystem.
Version 5.09_w90
–
2014-01-17
Bugfix: Loading screen did not disappear after login.
Bugfix: SYSTEM/SETTING serial set field reset the rights when empty or bad serial number
posted
Bugfix: ENCODER/DESTINATION page link update cauesed a lot of cPU load
Bugfix: ENCODER/DESTINATION RTP/FEC set was unseted.
Bugfix: URL Push Mode info box corrected
Version 5.08_w88
–
2013-12-13
Update mechanism can now handle images sizes greater 30MiB. Drawback: upload to flash
lasts up to two times longer
Enable IEEE802.1x authentication (unsupported feature)
RTMP Ver. 1.6.4 (limelight)
sine output level is now -9dB(FS)
Export recording directory (/media/sda1) read-write via ftp with username. When no USB stick
is present login is denied, when USB media is removed while ftp user is logged in an empty
directory listing is returned and no upload is possible.
BUGFIX: stop recording when 4GB file size is reached on FAT filesystems
BUGFIX: stop recording when disk is full
In both cases recording is stopped now and to indicate trouble LED blinks red/green (as with
network problems).
NTFS support
Busybox NTP support (static/dhcp)
/status/encoder/0/recording/bytes_free shows free disk space
Save system clock to realtime clock once a day
Log ntp output to /var/log/messages
Allow hostnames for ntp server configuration
BUGFIXES: eliminate audio glitches, colorbar error
Case sensitive password support
Version 5.01_w79
–
2013-08-30
IMPORTANT: Updating to this version requires firmware v3.xx to be installed on your device. It is not
possible to update from version 2.xx!
Encoder/Destination RTMP PUSH URL generation modified.
Encoder/Destination Recording mode video list added
Encoder/Destination Recording video files can be download and delete from the usb stick
Encoder/Video FrameMode Deinterlaced added
Down Convert 406p added
Statusbar updated at rec mode
Version enc300_2.99_formating_upgrade_tool
The upgrade includes a reset to factory default settings except the system Ip address.
All Presets and Logos are deleted. Download and save the Presets and Logos to your local PC BEFORE
you update with 2.99 .
The password is also set to the factory default value: admin
You have to use the ENC-300_formating_upgrade_tool_2.99.cpio before you can upgrade or
downgrade fom one major release to another.
2.x/3.x/4.x ---> 2.99 ---> 5.xx
or
5.xx >--- 2.99 >--- 2.x/3.x/4.x
Version 3.01_w67
–
2013-06-18