Teracom TCW241, User Manual

Page: 53 / 55

TCW241_R4.17 – October 2022 Page 53
9. Factory default settings
TCW241 can be restored to its original factory default settings in 3 different ways.
9.1. Factory default from the WEB interface
If the button “Factory default” from Administration ->Backup/Restore is pressed, all parameters
return to factory default except Network settings.
9.2. Factory default with the reset button
If the reset button is pressed for more than 5 seconds, while the device is working, all Network
settings go to factory default.
9.3. General factory default with the reset button
For factory default reset of all parameters following steps should be executed:
•
Press and hold the RESET button, then turn on the power supply;
•
Yellow LED shines and red LED blinks about 5 times on а second;
•
After about 5 seconds red LED will turn off, the button can be released;
•
Yellow LED flashes on 1 second and red LED shines – the device is in working mode, with
factory default settings.
The factory default settings are:
Username admin
Password admin
IP Address 192.168.1.2
Subnet Mask 255.255.255.0
Default Gateway 192.168.1.1
SNMPConfiguration disabled
readCommunity public
writeCommunity private
Analog inputs unit voltage
Analog inputs multiplier 1.000
Analog inputs ofset 0.000