TCW241_R4.17
–
October 2022
Page 12
If the network settings are correct, the login pop-up window will appear:
All TCW controllers connected to LAN can be easily found by a
free tool “TCW discoverer”.
It is available for Win and Mac operating systems and can be downloaded from www.teracomsystems.com
7.
Web interface
The WEB interface allows configuration, monitoring, and control. All pages are UTF-8 encoded.
For the WEB interface, the device supports HTTP only (HTTPS is not supported).
If the controller is properly addressing, login pop-up window appears.
Authorization data must be entered (by default username=admin, password=admin).
It is recommended to change the username and password to prevent unauthorized access to the
controller.
The controller supports a few active session.
7.1.
Monitoring page
Monitoring page displays the current state of TCW241.
The page has 4 sections
–
“Sensors”, “Digital inputs”, “Analog inputs” and “Relays”. All they can be
added/removed from monitoring page independently by appropriate setup -
see “Setup
-System-
Display” section.
For every parameter (sensor, input, relay) there is a description of up to 15 characters. Default ones
can be changed in “Setup
-
Input/Output”.
The Monitoring page can be automatically refreshed on an interval of 0 to 253 seconds. Zero means
no automatic refresh. This parameter is set in section “Setup
-System-Monitoring page automatic
refresh
”. By default
, it is 1 second.
7.1.1.
Data - sensors section
All detected 1-Wire sensors are shown in this section.
Summary of Contents for TCW241
Page 1: ...smtp...
Page 16: ...TCW241_R4 17 October 2022 Page 16...
Page 55: ...TCW241_R4 17 October 2022 Page 55 Appendix A Fig 1 Fig 2...
