TCW241_R4.17
–
October 2022
Page 23
7.2.5.5.
Display
The unit for observed temperatures can be selected from different scales.
All four sections on “Monitoring page” can be added or removed
independently by appropriate
setup here.
7.2.6.
NTP
Internal RTC (real-time clock) of the controller can be set either manually or automatically.
For automatic clock synchronization, the controller supports NTP (Network Time Protocol) and all
necessary parameters for automatic synchronization are available in this section.
By default NTP synchronization is disabled, server
–
time.google.com, Time zone +00:00 and
interval of 12 hours.
7.3.
Services
7.3.1.
MODBUS
TCW241 supports Modbus TCP/IP over the Ethernet interface.
By default, Modbus is disabled. Standard port for this protocol is 502. The table with the registers
addresses can be found in section 8.3. MODBUS TCP/IP.
Summary of Contents for TCW241
Page 1: ...smtp...
Page 16: ...TCW241_R4 17 October 2022 Page 16...
Page 55: ...TCW241_R4 17 October 2022 Page 55 Appendix A Fig 1 Fig 2...
