TCW122B-CM_R4.5 – March 2019
Page 9
For digital inputs, conditional email sending can be arranged by following part of the page:
Relays can be activated automatically depends on the value of the monitored parameter
(humidity, temperature, analog voltage and changes on digital inputs) or manually. Only one
parameter can be assigned for relay activation, at the same time:
When manual activation is selected, “Pulse” and “ON/OFF” buttons on “Monitoring” page are
active. The duration of the pulse for relay activation can be set from 1 to 253 seconds.
By default, relay state changes via the WEB interface are memorized in a non-volatile
memory. After the power on, the relay goes in its last state, before the power down.
If the “Save relay state after change via WEB” is No, after power on the relay is always OFF.
By default, relay state changes via the HTTP API aren’t saved and after power on the relay is
always OFF.
The guaranteed write cycles (every change saving doesn’t matter via HTTP API or WEB) are
100000.
For every sensor, analog input, digital input and relay description with a length of 11 characters
can be set.
Temperature units can be changed between Fahrenheit and Celsius.
Automatic monitoring page refresh interval can be set from 1 to 253 second.
Summary of Contents for TCW122B-CM
Page 1: ......
Page 19: ...TCW122B CM_R4 5 March 2019 Page 18 Appendix A Fig 1 Fig 2...
