TCW122B-CM_R4.5 – March 2019
Page 11
9.3.
Remote monitoring
A relay contact of the monitored device is connected to the digital input. When an event occurs
– the controller can send an e-mail and/or SNMP trap.
9.4.
Data acquisition
The TCW122B-CM can be used in Data Acquisition Systems (DAQ). The device uses SNMP v.1
protocol for communication with monitoring and management software applications.
10.
1-Wire Bus
1-Wire is a registered trademark of Maxim Integrated Products, Inc. It is designed to connect
several sensors over a short wiring. The bus carries power and a single data wire. It is not suitable
for long distances or environments with EMC interference. We strongly recommend reading
Maxim’s 1-Wire tips at http://www.maxim-ic.com/app-notes/index.mvp/id/148.
We recommend keeping the total wiring length under 30m, although functionality has been
achieved in the longer distance. We cannot guarantee error-free operation over mentioned wiring
length.
We guarantee proper operation only with our 1-Wire sensors series TST1XX and TSH2XX.
Summary of Contents for TCW122B-CM
Page 1: ......
Page 19: ...TCW122B CM_R4 5 March 2019 Page 18 Appendix A Fig 1 Fig 2...
