TCW122B-CM_R4.5 – March 2019
Page 16
13.
Firmware update
TCW122B-CM
supports remote firmware update. To update the device follow the steps below:
•
Go to www.teracomsystems.com and download the latest firmware version from
TCW122B-CM product page;
•
Go to the device login page, enter a username, and password and press the “Login”
button;
•
Go to “Update” menu, select the update .cod file and press “upload” button;
•
After the firmware update is completed, you will be forwarded to the device Login
page.
Attention! Don’t turn off the power supply during the update. Turning off the power supply will
damage the device.
For some updates factory default settings procedure is mandatory.
14.
Factory default settings
TCW122B-CM can be restored to its original factory default settings, following the steps below:
•
Turn off the power supply;
•
Press and hold the RESET button then turn on the power supply;
•
After turning the power supply release the RESET button. The LED’s STS and LOG will
flash 14 times, after that only the STS LED will continue to blink. The controller is
restored to its default settings.
The factory default settings are:
User Name (Admin)
admin
Password (Admin)
admin
IP Address
192.168.1.2
Subnet Mask
255.255.255.0
Default Gateway
192.168.1.1
SNMPConfiguration
disabled
readCommunity
public
writeCommunity
private
Summary of Contents for TCW122B-CM
Page 1: ......
Page 19: ...TCW122B CM_R4 5 March 2019 Page 18 Appendix A Fig 1 Fig 2...
