Teracom TCW122B-CM, User Manual

Page: 13 / 20

TCW122B-CM_R4.5 – March 2019 Page 12
11. Control and monitoring using SNMP
TCW122B-CM can be configured and monitored through SNMP (Simple Network Management
Protocol). This could be done using every SNMP v.1 compatible program. Parameters that can be
changed, are grouped according to their functions in the tables below. To obtain a valid OID
number it is necessary to replace the “x” symbol with ”1.3.6.1.4.1.38783”. To save the changes
configurationSaved (OID x.3.13.0) should be set to "1".
11.1. Product
OID Name Access Description Syntax
x
.1.1.0 name read-only Device name String
x .1.2.0 version read-only Firmware version String
x .1.3.0 date read-only Release date String
11.2. Setup -> network
OID Name Access Description Syntax
x.2.1.1.0 deviceIPAddress read-write Device IP address IpAddress
x.2.1.2.0 subnetMask read-write Subnet Mask IpAddress
x.2.1.3.0 gateway read-write Gateway IpAddress
x.2.1.4.0 deviceMACAddress read-write Device MAC Address OCTET STRING (SIZE(6))
x.2.1.5.0 dhcpConfig read-write DHCP configuration ON/OFF INTEGER { off(0), on(1) }
x.2.1.6.0 dns read-write Domain Name Server address IpAddress
x.2.1.7.0 Hostname read-write Device hostname String (SIZE (0..38))
11.3. Setup
->
snmpSetup
OID Name Access Description Syntax
x.2.4.1.0 snmpConfiguration read-write SNMP Configuration INTEGER { disabled(0), enabled(1) }
x.2.4.2.0 trapEnabled read-write TRAP messages ENABLED/DISABLED INTEGER { no(0), yes(1) }
x.2.4.3.0 trapReceiverIPAddress read-write TRAP receiver IP address IpAddress
x.2.4.4.0 trapCommunity read-write TRAP community String (SIZE (0..13))
x.2.4.5.0 trapInterval read-write TRAP messages interval INTEGER (1..253)
x.2.4.6.0 maxNumberOfTraps read-write Maximum number SNMP traps INTEGER (1..253)
11.4. Setup
->
oneWireSensor1
->
temperature1
OID Name Access Description Syntax
x.2.5.1.1.0 temperature1Min read-write Temperature1 range (min. value) INTEGER (-400..1250)
x.2.5.1.2.0 temperature1Max read-write Temperature1 range (max. value) INTEGER (-400..1250)
x.2.5.1.3.0 temperature1Hyst read-write Hysteresis INTEGER (0..1250)
x.2.5.1.4.0 temperature1Action read-write Temperature1 action INTEGER { noAction(0), sendMail(1) }
11.5. Setup
->
oneWireSensor1
->
humidity1
OID Name Access Description Syntax
x.2.5.2.1.0 humidity1Min read-write Humidity1 range (min. value) INTEGER (0..1000)
x.2.5.2.2.0 humidity1Max read-write Humidity1 range (max. value) INTEGER (0..1000)
x.2.5.2.3.0 humidity1Hyst read-write Hysteresis INTEGER (0..1000)
x.2.5.2.4.0 humidity1Action read-write Temperature1 action INTEGER { noAction(0), sendMail(1) }