TER 206, Operating Manual

Page: 44 / 56

OPERATING MANUAL OPERATING MANUAL
English
GB
English
GB
GB GB
Connect the plug cod. B0045AA to the external socket,
like shown in the diagram
- Tig Torch switch
- Tig Torch switch with potentiometer
- Tig Torch switch with up/down switchers
Connect the plug cod. B0045AA to the external socket,
like shown in the diagram
- external MIG feeder with digital torch
- Spool Gun with potentiometer
Press the second level pushbutton to light the arc length icon on and adjust the arc length pressing the pushbut-
tons “+” and “-”
Press twice the second level pushbutton to ligth the icon of the inductance on and adjust the inductance pressing
the pushbuttons “+” and “-” (increase inductance value for softer arc and reduce it to obtain a harder arc)
REMOTE CONTROL
The machine automatically recognize any eventual remote control connected to the front panel socket.
Use socket 1 for Tig & MMA applications.
Use socket 2 for Mig, Pulsed Mig and Spool on gun applications.
Important:
do not use the machine with both sockets connected.
REMOTE CONTROL
Note: once the remote control plug is connected, the icon “I SET” will flash and the display will show the remote
control set value.
From the machine potentiometer it is possible to adjust the maximum setting current.
The display shows the maximum setting during the adjustment and the icon “I SET” light on.
In standard Mig mode, the spool on gun remote control voltage should be adjusted at “I 20%”.
The diplay shows the set value.
Tig
external Mig feeder /
Spool gun torch
socket 1
socket 2
socket 1 socket 2