TER 206, Operating Manual

Page: 10 / 56

OPERATING MANUAL OPERATING MANUAL
English
GB
English
GB
GB GB
The machine stops its main functions when it is not continuosly used, in order to
reduce the power consumption at 10W, and “STANDBY” icon lights.
The fan works only when the machine need to be cooled down; during ligth
applications, the fan normally doesn’t work.
Power supply control
The machine can be used with motogenerator power supply and/or long supply cables; the supply voltage should
run between 180V and 270V limits.
When the supply voltage overlaps those limits, the machine functions stop and the main panel lights the last sup-
ply voltage, like picture shows.
Functions can be recovered switching the machine off and than on again.
STAND BY
Means “Power Supply” 169V was the voltage before the
machine shut down
MMA WELDING: MANUAL MODE SETTING
Connect the electrode holder and the earth clamp plugs to the correct machine polarities, according to the
electrode manufacturer specs.
Negative polarity
Positive polarity
Press the first pushbutton and select the icon “STICK”
Press the second pushbutton and select icon “MANUAL”