TER 206, Operating Manual, Page: 37 / 56

OPERATING MANUAL OPERATING MANUAL
English
GB
English
GB
GB GB
Third icon is 4 steps cycle.
The first switch press releases the pregas protection; once the switch is released, the welding starts and it stops at
the second switch press. The gas flow continue unti the switch is totally released.
Forth icon is two step with down slope, (when the switch is released the current slow down to final current with
down slope.
Fifth icon is complete cycle four steps with slopes.
At the first switch press, the welding starts with the initial current (lower than the welding current);
once the switch is released, the current rise up (slope) to the set welding current.
The current remains at the final current until the switch is totally released.
At the second press, the current slow down to the final current with slope (adjustable with second level pushbut-
ton).
Note : during the welding, the icon “V SET” blank and ligh on the icon I REAl, the main digital instrument shows the
real welding current.
Press for 5 seconds the second level pushbutton.
The main display write “BBT” and the right hand side display will show the actual BBT time
BURN BACK TIME
It is the time, at the end of welding, allowing the burning of the wire up to 2-5 mm from the work piece.