Instruction Manual
Multi Synergic 280 - Multi Synergic 350 - Multi Synergic 400F - Multi Synergic 500- Multi Synergic 500F and Accessories
55
Default icon Iset is on
Rotate K1 for adjust set current, or
use wire speed setting.
Push K1 until icon ser speed L1 is on.
Rotate K1 for adjust the wire speed.
Display-1 show the wire speed in mt/min.
Push K1 until icon Twice set L8 is on.
Rotate K1 for adjust twice frequency.
Display-1 show the frequency.
Push knob K2 until icon CYCLE
(L15) is ON.
Rotate K2 for select the torch
switch Cycle.
Set 2T cycle with
icon L16 is on
Set 2T slope cycle
with icon L16 and
L18 are on.
Set 4T cycle with
icon L17 is on.
Set 4T slope cycle
with icon L17 and
L18 are on.
Timer cycle with
icon L19 is on.
Select the Torch switch cycle - PULSE MIG mode
TWICE MIG MODE: PARAMETER SETTING
Current Setting - Twice MIG mode
Wire Speed Setting - Twice MIG mode
Twice Frequenzy Setting - Twice MIG mode
K2
K2
K2
K2
K2
K2
K1
K1
K1
