Instruction Manual
Multi Synergic 280 - Multi Synergic 350 - Multi Synergic 400F - Multi Synergic 500- Multi Synergic 500F and Accessories
23
To modify the second level parameters, select
with the forth push button.Once selected, use
the second knob to adjust. The little display,
shows the correction value in % That can in-
crease or decrease up to 100% the current
synergic value.
With the second knob, the arc length can e
adapted to the welding, The adjustment of the
arc length is +/- 20 and a symbol of the arc
length light on during the regulation
28. PULS MIG SYNERGIC
To select the double pulse, push the forth push button
up to the icon FREQUENCY light on and Adjust the
double frequency level with the second knob.
SELECT PULS MIG- MODE:
There are only five puls program in Multi Syn-
ergic Starting from synergic program, push the
first push button, if the program exist, the puls
icon light on.
Adjust the welding current , in the little display The
value of the suggested thickness of the welding
material is proposed.
1
2
3
4
6
5
SELECT PULS MIG- MODE:
If the program in MIG is not included in one of the Table the
choose of pulse mig cannot be completed. For aviable pro-
grams to see table “PULSE MIG SYNERGIC PROGRAMS
(page 24).
