9. Mount Thermostat & Battery Installation
Important:
Then it will be working.
You can choose traditiona mode or heat pump mode based on your requirements. When heat pump mode
is set, the compressor will have a 5 minute delay before restarting.
You can choose to have reversing valve on the heat pump work in the heat mode or the cool mode.
In the heat pump mode, please check the recersing valve to see whether it is in O or B position, and
enter the system to set teversing valve to the position you need.
The thermostat has an intelligent recovery function that brings your room to temperature at exactly the
pre-set time by turning on the Heating earlier. Select 1 to activate the intelligent recover function, Select
0 to deactivate the intelligent recovery function. The default setting is “0”.
This function is the control and selection for the heat fan, If you use a gas or oil heating system, Please
choose “
GAS
” (system controls fan operation). If you use an eletric heating system, please choose
“
Electric
” (thermostat controls fan operation).
High quality alkaline batteries are recommended. Rechargeable batteries or low quality batteries
may not have a 1-year life span.
Step 1: Align the inner snaps with
the top part of the thermostat.
Step 2: Hang the two hooks of the
front part at 30°right to the snaps.
Step 3: Press in the lower part of the front
display panel to complete the installation.
TENZA
TENZA
