(1) COOL/HEAT/OFF: Press the “COOL/HEAT/OFF” button once to turn on the system. The mode will be
cool and “ ” is displayed. The room temperature
setting temperature, and clock will be also displayed.
To change to heating mode, press the COOL/HEAT/OFF button a second time and “ ” will be displayed.
Press again to turn off the system and “
off
” is displayed.
(2) Setting temperature: When power on, press “ ” or “ ” to set the temperature. Press “ ” to lower
the setting temperature, and press “ ” to raise the setting temperature.
(3) Fan mode: When power is on, press the fan butoon to select fan on, and press a second time to change
the fan to auto mode.
(4) Run button: When power on, press the button to run the program that has been set. “Run On” will be
displayed. In programming mode, or when changing system parameters, press “Run” to exit and save the
changed parametrs.
(5) Hold button: When power on, press the “Hold” button to hold the temperature setting, The program will
not run and the thermostat will display “Hold”. For example: if the setting temperature is 60°F
, after
pressing the “HOLD” the system will lock the setting temperature to 60°F
.
If there are no inputs for 30 seconds, the system will automatically exit the setting interface and the
changed parameters will not be saved. When power on (on cool/heat mode), hold “SET” for 3
seconds to enter the programing mode:
(1) First is to set the system clock. And if you hold “ ” or “ ”, the adjudtment will be accelerated.
(2) Press “SET” again to set the day the week. When the week area is flashing, press “ ” or “ ” to
change the day the week.
(3) Press “SET” again to set wake time from Monday to Friday. When the clock area is flashing, press
“ ” or “ ” to adjust the time.
(4) Press “SET” again to set Wake temperature from Monday to Friday. When the clock area is flashing,
press “ ” or “ ” to adjust the temperature.
(5) Continuing to press “SET” allows you set the time temperature for Leave, Return and Sleep from Monday
to Friday and Saturday, sunday separately.
(6) After you have finished programming the setting, press “RUN” to exit the setting interface and save the
programmed parameters.
21°C/69.8°F
21°C/69.8°F
21°C/69.8°F
21°C/69.8°F
17°C/62.6°F
17°C/62.6°F
17°C/62.6°F
17°C/62.6°F
24°C/75.2°F
24°C/75.2°F
24°C/75.2°F
24°C/75.2°F
28°C/82.4°F
28°C/82.4°F
26°C/78.8°F
26°C/78.8°F
When the power is off, hold the “SET” button for 7 seconds to enter the parameter programming
interface.
The Room temperature area will display a symbol for each parameter, and the clock
area will display the values for each parameter. Continue pressing the “SET” button to cycle
through each parameter on the display. Press “ UP Button” or “Down Button ” to adjust each
parameter.
After you have finished programming, press the “RUN” button to exit the programming
interface and save the set parameters. (If there are no inputs for 30 seconds, the system will
automatically exit the setting interface and the changed parameters will not be saved.)
