Tennant 365, Operator'S Manual, Page: 48 / 102

MAINTENANCE
365 MM173 (3---90)
3-6
LUBRICATION
ENGINE
Check the engine oil level daily. Change the engine
oil and oil filter after every 50 hours of operation. Use
only SAE-SE/SF rated engine oil.
The following SAE-SE/SF rated oil grades are
recommended for engines during changing seasonal
temperatures:
MULTI-VISCOSITY OILS
Below 32 _ F --- 10 _ to 90 _ F --- 10 _ to above 90 _ F Above 10 _ F
(Below 0 _ C) (--- 23 _ to 32 _ C) (--- 23 to above 32 _ C) (Above --- 12 _ C)
5W 30 10W 30 10W 40 20W 40
SINGLE VISCOSITY OILS
--- 10
_
to 32
_
F 10
_
to 60
_
F 32
_
to 90
_
F Above 60
_
F
(--- 23
_
to 0
_
C) (--- 12
_
to 16
_
C) (0
_
to 32
_
C) (Above 16
_
C)
10W 20W 20 30 40
The engine oil capacity is 3.5 qt (3.3 L) including the
oil filter.
HOPPER PIVOT
The hopper pivot is near the front of the machine.
Lubricate the pivot by applying a multipurpose, water
resistant, lithium base, moly-disulphide EP grease to
the two grease fittings after every 200 hours of
operation.
A
B
03765
HOPPER PIVOT
A. Hopper Pivot
B. Grease Fitting
SIDE BRUSH PIVOT
The side brush mechanism pivots on a shaft near the
inside right front corner of the machine. Lubricate the
shaft by applying a multipurpose, water resistant,
lithium base, moly-disulphide EP grease to the
grease fitting after every 200 hours of operation.
A
B
02158
SIDE BRUSH PIVOT
A. Side Brush Pivot
B. Grease Fitting