background image

   

                         

TM-213

 

 

incompatible accessories or equipment. 

˙

 

Repairs made necessary by improper shipping 
material causing damages in transit. 

˙

 

Repairs made necessary by previous attempts for 
repair carried out by non skilled or unauthorized 
personnel. 

˙

 

Instruments for whatever reason modified by the 
customer himself without explicit authorization of our 
Technical Dept. 

 

The contents of this manual may not be reproduced in any 
form whatsoever without the manufacturer’s authorization. 
Our products are patented and our logotypes registered. We 
reserve the right to modify specifications and prices in view 
of technological improvements or developments which might 
be necessary. 

 

  Service 

If the equipment is an exception, calling repair before you 
test the battery and test lines and other conditions, if 
necessary, replace it. 
If the device still does not operate, check whether the 
operating procedures described in this manual consistent. 
To equipment repair, you must return the service at the (local 
address or regional offices), the customer pays the freight 
must be obtained before sending the other party's consent. 
Must be used to send the original packaging and included in 
the device more clearly as possible the content. 
If you do not use the original packaging to send the sender 
will be responsible for damage caused. 
Shouldn’t the instrument work properly, before contacting 
your distributor make sure that batteries are correctly 

Summary of Contents for TM-213













Reviews: