16
AC Current (AC+DC measurement is available)
Range
Resolution
Bandwidth
Accuracy
Overload
Protection
400
μA
0.01
μ
A
45Hz~1kHz
1kHz~10kHz
±(0.7%+15)
±(1%+40)
0.5A, 1000V fast
type fuse Ø10.3
x 38mm
4000
μA
0.1
μ
A
400mA
0.001mA
400mA
0.01mA
10A
0.001A
45Hz~1kHz
±(1.5%+20)
10A, 1000V fast
type fuse Ø6.3 x
32mm
1kHz~10kHz
±(5%+40)
Resistance
Range
Resolution
Accuracy
Overload Protection
400
Ω
0.01
Ω
±(0.3%+8) +test leads
OC value
1000V
4k
Ω
0.0001
kΩ
±(0.3%+8)
40k
Ω
0.001
kΩ
400k
Ω
0.01
kΩ
±(0.5%+20)
4m
Ω
0.0001m
Ω
±(1%+40)
40m
Ω
0.001
mΩ
±(1.5%+40)
Continuity Test
Range
Resolution
Overload Protection
0.01
Ω
1000V
•
Open circuit voltage approximate -1.2V.
•
The buzzer does not sound when the test resistance is >60
Ω
•
The beeper sounds continuously for open circuits and if test resistance is ≤40Ω
Diode Test
Range
Resolution
Overload Protection
0.0001V
1000V
•
Open circuit voltage approximate 2.8V.
•
A good silicone junction drops between 0.5V and 0.8V
•
True rms are valid from 10% of range to 100% of range
•
AC crest factor can be up to 3.0.
•
A residual reading of 80 digits with test leads shorted, will not affect stated accuracy.
•
When frequency is lower than 100kHz, the accuracy guarantee range 10% -100%
•
For AC+DC measurement, add (1%-35 digits) of reading based on above table.
•
When the measured current is ≤5A, continuous measurement is allowed.
•
When the measured current is between 5A-10A, continuous measurement must
be ≤10 seconds and interval more than 15 minutes.
