13
Using Send
•
When using a Send feature, please refer to the Installation Guide on the included
CD-ROM.
Changing the Default Setting
•
The meter allows you to change the default operating configuration by changing
setup options made at the factory.
•
It is recommended to change the default setting only when the Meter is in DCV
measurement mode.
•
To enter the Setup mode, turn the meter on and press and hold SETUP button for
over 1 second.
•
Each press of SETUP button steps to the next Selection. Each press of - or +
button increments or decrements an option.
Selection
Option
Factory
Default
Description
HIGH
Max. 40,000 (model 72-7732A),
Max. 20,000 (model 72-7730A)
Press◄ to select off
Press ►to select the digit you want to edit.
OFF
Over the upper limits,
beeps intermitently
LOW
Max. 40,000 (model 72-7732A),
Max. 20,000 (model 72-7730A)
Press◄ to select off
Press ►to select the digit you want to edit.
OFF
Over the upper limits,
beeps intermitently
10
20
30
OFF
10 mins
10 mins power off
20 mins power off
30 mins power off
Power off is disabled
1
OFF
1
Beeps continuously and
icon lights on
No beep, icon flashes
10
20
30
OFF
10
Backlight turns off in 10 sec
Backlight turns off in 20 sec
Backlight turns off in 30 sec
Disable backlight feature
Analogue
Bar
Graph
Zero is in left hand side
Zero is in the centre
Zero in
Centre
Only applies to DCV, DCI
and C
o
/ F
o
functions
Saving Setup Options
•
At each setup Option, store your choice and exit setup by press EXIT, advance to
the next Option by press +.
•
To exit the Setup mode without saving the present Option, press SETUP.
