7. Factory settings
Load:
50kg
Filter:
35 cm
Audio signal upper limit:
100%
Audio signal lower limit:
90%
Partial Average Power and Peak Force range: 50% Rest Time:
OFF
Eccentric Average velocity (ECS):
OFF
8. Batteries
8.1 How to charge batteries
The microcomputer has a built-in battery charger. To charge batteries, please use AC / DC Power
Supply Adapter. (included in the package)
The Power Supply Adapter Input: 110 – 230V AC, 50-60 Hz, Output: 12V DC, 1.2A
Use the NiMH, AA size rechargeable batteries, 2000 - 2500 mAh.
Power Supply Adapter setup:
- Plug the connector into the appropriate socket at the bottom of the
microcomputer
- Plug the power supply adapter to the 110 – 230 V AC outlet
Precautions:
-
Do not exceed the rated operating parameters
-
The device may interfere with radio and television sensitive equipment located
nearby
-
There is a risk of the harmless electric shock, fire or equipment failure. Do not
disassembler or repair the device and do not touch the interior parts of
the device.
-
Do not disassembler the housing
-
Dangerous voltages may still exit in the power supply even after few minutes
from off the power.
-
Damaged power cord must be immediately replaced by a qualified technician.
-
Do not use the device if it emits smoke, an abnormal smell or strange sounds.
17
