•
Lower limit
means every measured value of the selected parameter (power, velocity, force)
which is below a setting percent values of lower limit will be indicated by means of short beep.
Setting range:
Lower Limit range from 0% to Upper Limit.
Upper Limit range from 100% to Lower Limit.
Use Up and Down buttons to change settings.
6.4.3 Filter
Purpose of the filter is to hide unwanted movements. This means that all the movements with the
range of motion less than the setting value of the filter, will not be shown on display.
For instance: take barbell from the rack, or short movement while holding a barbell, etc.
Setting range
- from 0 to 150 cm
Use Up and Down buttons to change settings.
FILTER is a limit from 0 to a certain predefined value of the range of motion in centimetres
(10 centimetres = 0.1 meter),
which microcomputer does not show
.
It means the exercise
range of motion has to be longer than the value of the Filter.
-
For
most of the exercises
we suggest to set Filter to 35 cm.(less then length of the motion)
- For
exercises with very short amplitude
(e.g. toe raise) we suggest to set Filter to 10 cm.
- For
exercises with very long range
(Olympic lifting exercises) we suggest to set Filter to more
than 80 cm.
13
