6.3 Exit setup mode
Press Reset Button and all changes will be saved.
If you do not press Reset Button, the microcomputer exits from setup mode automatically after 30
seconds, without saving new settings.
6.4 What can be set up in setting mode
•
Load
•
Audio signal Lower/Upper Limit
•
Filter 0 – 150 cm
•
% limit for Partial Avg. Power and Peak Force
•
Rest time
•
Eccentric velocity
6.4.1 Load
It is possible to change a weight setting, even if data are measured, without resetting the
microcomputer unit.
Use Up and Down buttons to change settings.
6.4.2 Audio signal Lower/Upper Limit
•
Upper limit
means every measured value of the selected parameter (power, velocity, force)
which is above setting percent values of upper limit will be indicated by means of double beep.
12
Use the Up and Down button to change
settings.
