VLAN Management
- 44 -
7.3 ONE KEY VLAN
Note
Prior to enabling “ONE KEY VLAN”, please link the port G1/SFP1, G2/SFP2 to the
central switching device.
This mode is suggested to be initiated in case of the DHCP conflict resulting from the
wireless router connected privately with the switch.
7.3.1 Configuration Wizard
The following is concerned with how to configure the port VLAN of Tenda Web Smart PoE
switch and configuration tasks:
Steps Configuration Tasks
Specification
1
7.3.2.1 VLAN Mode Toggle
Mandatory.
VLAN mode is port VLAN by default.
2
7.3.2.2 View Results of VLAN Division
Optional.
7.3.2 ONE KEY VLAN
Please toggle VLAN Mode before viewing results of VLAN division.
7.3.2.1 VLAN Mode Toggle
When VLAN Mode is toggled to the ONE KEY VLAN, the system will automatically divide
each downlink port and uplink port (Port G1/SFP1 and port G2/SFP2) as a separate VLAN.
Configuration Steps:
1.
Log in the Web administration and then go to
VLAN Management
page;
2.
Select
ONE KEY VLAN
for VLAN Mode;
3.
Click
OK
