System Administration
- 7 -
Header Entry
Description
VLAN
Management
When VLAN mode is 802.1Q VLAN, the management VLAN of the
switch is 1 and unavailable to be modified.
Note
The switch only can be visited when the computer is connected to the
VLAN port member (PVID of the port is 1).
Device Name
The model of the device, e.g, the name of 16-Port 10/100Mbps + 2
Gigabit Web Smart PoE Switch
is “TEF1218P-16-250W”.
DHCP Client
Enable/Disable DHCP client function
Enable: The switch will automatically acquire IP address, subnet
mask and gateway from the DHCP server
Disable: Manual settings are required for IP address, subnet mask
and gateway to manage the device and connect to the Internet.
Note
When DHCP Client is
enabled, you must check the switch’s IP address
from DHCP server before your next access to the Web administration
and use this IP address to login.
IP address
The IP address of the switch. The default one is 192.168.0.1 and can be
modified when DHCP client is disabled.
Also, it is the management IP address of the switch which can be used
to log in to the Web administration.
Note
Once IP address is altered, it is necessary to change the IP address of
the governing computer to keep its network segment consistent with that
of new one. And only the new IP address can be used to log in to the
Web administration.
Subnet Mask
The subnet mask of the IP address. The default one is 255.255.255.0,
and can be modified when DHCP client is disabled.
Gateway
It is the gateway address of the switch by default. It can be modified
when DHCP client is disabled.
MAC
Aging It is the dynamic MAC aging time and suggested to keep the default
