Device Management
- 79 -
Parameter specification:
Header entry
Description
SNMP
Enable/Disable the SNMP agent function of the switch.
Community
String
Set the community string. The community string
of “read-only” access
mode is “public” by default, and the community string of “read/write”
access mode is “private” by default.
The length of a community string shall comprise 1~15 characters, in
which no Chinese characters, single spaces, quotation marks and the
following special characters within the following quotation marks (“/”, “˂”,
“˃”, “|”, “
？
”) are allowed to occur.
Access Mode
Select the access authority for the group for MIB views, and two types
namely “read only” and “Read & Write” are available.
Read only: Group has read-only authority for MIB views.
Read & Write: Group has read-and-write authority for MIB views.
Set the SNMP Trap
Trap function allows switch to transmit information aggressively to the SNMP administrator
to report some emergency events. For the configuration procedures give below, we assume
that the IP address of SNMP administrator is 192.168.0.212.
