- 29 -
6 PoE Management
All
Downlink Ports
support PoE power supply and conform to IEEE 802.3af and IEEE
802.3at. The switch will automatically supply required PoE power to the powered device
which is connected with the PoE port.
Click
PoE Management
to enter the page below. You can check the PoE power status of
the current switch and enable/disable the PoE power function of the downlink port as well.
Tip
By default, the PoE power function of all switch downlink ports is enabled.
Parameter specification:
Header entry
Description
PoE status
Enable/Disable the PoE power function of the selected port.
Check the box at the front of the corresponding port number to select
that port. Check the box at the top to select all of the ports.
