Tenco 900-01201-000, Manual

Page: 27 / 35

9.04.04 I
NSERTING LABEL
’
S REELS
To insert the paper roll in the labelling station, see layout SCHEME 1 page 26.
a) Loosen the knob H, remove the reel retaining plate M.
b) Open the tensioning roller C and the knurled driving roller G.
c) Insert paper roll and scroll the band following the paper path as shown in SCHEME 1.
d) Re-assemble the reel retaining plate M by leaning it against the paper roll and by pressing 3-4
mm on the compression springs. Warning: do not press completely the springs to avoid the paper
roll being blocked and the scrolling of the paper being hard.
e) Scroll the paper to position one label out 3-4 mm from the blade as shown in photo 9.10
f) Retain the paper and press the knurled driving roller G against the rubber drive roller.
g) Close the tensioning roller C.
Photo 9.10 Label output from blade