Tenco 900-01201-000, Manual

Page: 11 / 35

CHAPTER 6
INITIAL INSTALLATION
6.01 Arranging the area
Arrange an area suitable for operation of the machine (see the “technical characteristics” table) as per European
standard EN60079.
Set the unit at a point where the lighting is not less than 200 lux.
The power cable supplied with the unit is 5 metres long and has no plug (IEC 309 2P + T 230 V). Check the
distance for access to the electrical panel for hook up.
Do not use extension cords of any sort, flat or winding, as there is the risk of overheating.
Also arrange for connection to a compressed air system (only with marker installed on the machine).
6.02 Positioning
Moving the machine very carefully, take it to the arranged position (see 5.03 Handling the contents).
Set the machine in a stable position, check that it is level, make any necessary corrections and then lock the
wheels or adjustable feet.
6.03 Electrical connections
Make certain that the power supply system has a differential circuit breaker and an earthing system compliant
with the standards.
Check the electric characteristics of the machine (see “technical characteristics” table) and check that the power
supply is suitable and compliant with Directives 98/37/EC (Machinery Directive), 94/9/EC (ATEX Directive),
89/336/EC (Electromagnetic Compatibility Directive), 73/23/EEC (Low Voltage Directive).
After having checked the above, hook up the machine to the power supply using the cable and plug (IEC 309 2P
+ T 230 V) not provided.
6.04 Paper quality
If the quality of the paper used in the labels is not suitable for blade peeling, the labels can get twisted and
machine function will be poor. Always notify the label manufacturer of the problem of peeling.