12
13
2. CONTROL ELEMENTS
COMMON INTERFACE SLOT
The common interface (CI+) slot can hold a conditional access module (CAM) with SmartCard that allows you to
use pay-tv programmes and offers. Contact your television provider to obtain further information on contracts
and on the modules.
Note: Conditional access module and SmartCards are available separately from the respective provider.
Caution! Switch off your TV before introducing a module into the CI+ module slot.
The CI+ module slot is located on the reverse side of your device. Push the CA module correctly into the slot and
then introduce the SmartCard into the CA module.
• Select the channel to be enabled with your SmartCard.
• Wait for a few minutes for the SmartCard to be activated.
• Details on the SmartCard you use are displayed.
• Press
OK
to call up the SmartCard menu. Follow the instructions on your CI+ module when making manual
settings.
• When the module is removed, the following message appears:
“CI module removed”
2. CONTROL ELEMENTS
SIGNAL INPUTS
HDMI / AV setup
The menus for HDMI or AV connections are comparable to those of normal TV reception, except that you cannot
make any channel settings.
If there is no signal when HDMI is selected as input source, the following screen is displayed:
If no signal can be detected within 30 minutes, the device will automatically switch to standby mode.
AUDIO INPUT
Select AV as input, for example, if you wish to use an MP3 player. The screen will switch off after 30 minutes,
but the speakers will remain active.
