4
1. CONTROL ELEMENTS
Please note: When you switch the primary TV set on, it immediately resumes priority over the control commands.
The system will provide an image to the primary TV set. When you switch the primary TV set off, the antenna will
retract. To prevent retraction, use the "Open Sleep" function (see section 2.2 / page 15).
If in the meantime the antenna has received a control command via the app, then the primary TV set may no
longer show an image (e.g. if the antenna has been moved into a different position using the app). To resume
antenna control, press the START button on the primary TV set’s remote control. The antenna will then move back
into its initial position and the TV set will show an image.
1.2 Operating the antenna
If the antenna system is set up in the normal manner, it is not necessary to operate the antenna. The system will
find the corresponding satellite automatically.
The antenna function is controlled by the following 3 remote control buttons:
Country button: without function because of the three interacting components GPS, compass and inclination
sensor.
Stop button; Start button; Park button – for the direct operation of the antenna.
When the receiver integrated in the "Oyster® TV" Premium device is switched off, the antenna buttons are not
operational. The other buttons on the remote control can be used to control the receiver integrated in the "Oys-
ter® TV" Premium system. See point 1.3 "Remote control". The "Oyster® TV" Premium system is configured at the
factory to control the antenna.
Summary of Contents for OYSTER V PREMIUM
Page 1: ...INSTRUCTIONS FOR USE www ten haaft com OYSTER V ...
Page 50: ...50 NOTES ...
Page 51: ...51 NOTES ...
