manualshive.com logo in svg

Ten-Haaft OYSTER V PREMIUM, Instructions For Use Manual

Share
Download
Ten-Haaft OYSTER V PREMIUM Instructions For Use Manual Download Page 37

37

3.7 Further functions

VIDEOTEXT (NOT PROVIDED BY ALL CHANNELS)

Videotext is an information system you can view on your TV set. You can use the corresponding control buttons 
to open the pages listed in the index. 

Note: While videotext is shown, no display menus can be opened. Colour, contrast and brightness settings 
are not available, only the volume can be adjusted. 

Press 

TEXT

 to start videotext. The index page is usually shown first.

Pressing 

TEXT

 again will close videotext, and the TV programme of the selected channel will be shown again.

Mixed view

If you have started videotext, you can press "Mix" 

SUBT

 to switch it into transparent mode, enabling you to see 

the programme at the same time.

Hide

Press "Cancel" 

AUDIO

 to completely hide videotext without exiting it.

Selecting a page

•   To navigate to a videotext page, use the number buttons to enter the corresponding number. The numbers are 

shown in the upper left corner of the display. The page search is started.

•  To return to the index page, press "Index" 

PAGE+

.

•  To select a subpage, press "Subpage" 

PAGE-

.

Subtitles

To show subtitles during normal TV mode, select videotext page 150. If the programme provides subtitles, these 
will be shown at the bottom of the screen.

•  Press 

TEXT

 to exit videotext mode.

Revealing information

•  Press "Reveal" 

FAV

 to show hidden information (e.g. answers in quiz shows, etc.).

•  Press "Reveal" again to exit this mode. 

3. OPERATING THE "OYSTER

®

 TV"

Summary of Contents for OYSTER V PREMIUM





















































Reviews:

No comments

Brands by name

Popular brands

Load more brands