manualshive.com logo in svg

Tempur-Pedic TEMPUR-ERGO PLUS, Reference Manual

Share
Download
Tempur-Pedic TEMPUR-ERGO PLUS Reference Manual Download Page 14

TEMPUR-Ergo

™

 Plus

STEP 6 

Carefully flip the TEMPUR-Ergo

™

 Plus over to the 

topside up position.

NOTE:  Make sure to lift the adjustable base off 
the ground before flipping over. DO NOT use legs 
as a leverage point to ensure they do not break.

Proper handling 

!

Turn bed over without leaning against the 

installed legs.

DO NOT

 

lean the bed against the 
installed legs to flip it over. 

ATTENTION ! 

Improper handling

!

STEP 7 

Remove Mattress Retainer Bar (D) and install in upright 
position using a hex head driver (provided).

STEP 7A 

Line up Mattress Retainer Bar (D) to the edge of the foot 
of the bed.

STEP 7B 

Line up the Retainer Bar Plate (E) over the Mattress 
Retainer Bar (D) so the threaded holes are lined up.

STEP 7C 

Start with the right side and insert two (2) Retainer 
Bar Bolts (F) through the holes of the Retainer Bar 
Plate (E) through the opening in the Mattress 
Retainer Bar (D) to the base. Do not over tighten.

STEP 7D 

Repeat bolt installation for the left side.

STEP 7E 

Ensure the Mattress Retainer Bar (D) is lined up to the edge 
of the bed and tighten all four Retainer Bar Bolts (F).

STEP 8 

If this delivery involves dual bases and/or split 
mattresses, program accordingly. (Program remote 
control(s) per the instructions on page 20.)

STEP 9 

Place the mattress(es) on the base(s).

STEP 10 

Ensure the power switch on the surge protector is in 
the “on” position and that it is plugged into the wall 
outlet. Check the system for functionality with the 
mattress in place.

NOTE:  If the system does not respond, follow 
the setup procedure again to ensure that the 
base and remote control are communicating.

14

CUSTOMER SERVICE: 1–800–821–6621

Summary of Contents for TEMPUR-ERGO PLUS

























Reviews:

No comments

Brands by name

Popular brands

Load more brands