TEMPUR-Ergo
™
Plus
STEP 1
Lift carton top off box to reveal the bottom
of the base.
STEP 2
Using a power extension cord to reach the base,
plug in the base’s power cord.
NOTE: Do not uncoil the base power cord
which is packaged for shipment.
STEP 3
Slide the cover off the battery compartment on the
power supply and install the provided (2) 9-Volt
batteries. Replace the battery compartment cover.
NOTE: Do not mix old and new batteries.
STEP 4
Remove the remote control and (2) AA batteries
from the accessory pack, remove the cover from the
remote control’s battery compartment, and install
the batteries.
NOTE: Do not mix old and new batteries.
STEP 5
Power Test Procedure:
Press each of the following buttons long enough to
illuminate the blue back light on the remote control,
and watch/listen for the base to activate. This
ensures you will be delivering a base that is fully
functional. Test the base by pressing the buttons in
the following sequence.
NOTE: Only press each button long enough to
hear or see the function activate on the base.
1. Head Lift
2. Leg Lift
3. Flat
Pre‑Delivery Procedure
STEP 6
Once the warehouse test is successful and complete:
• Unplug the power extension cord
• Remove the batteries from the remote control and
power supply and return both to the accessory
pack
• Place the lid back on the outer carton and secure
for delivery
NOTE: Always keep the Ergo base in a flat,
horizontal position during transportation and
delivery.
NOTE: To avoid damage to the TEMPUR-Ergo
™
Plus, always open the carton while the bed is in
the flat position.
12
CUSTOMER SERVICE: 1–800–821–6621
