Tempest Shadow Nightfall, Owner'S Manual

Page: 12 / 20

- 11 -
TROUBLESHOOTING
Problem Probable Cause(s) Suggested Remedy
Contact nearest Service Center
for repair
Ensure Main Power Switch is on
Press Standby Button on The Remote
Control Panel. Red Power Indicator
light on the Remote Control Panel
will illuminate.
Check to make sure machine is
plugged in properly. Check the cir-
cuit breaker.
Machine will not produce
smoke when Fog Button
is pressed
Smoke output is weak
Machine does not
heat up
Contact nearest Service Center
for repair
Ensure Main Power Switch is on
Wait 7-10 minutes until green
Ready Indicator light illuminates
Rotate Fog Level Knob clockwise
Rotate the Fog Level Knob clockwise
Ensure filter is submerged
See the Priming the System section
of the manual
Contact nearest Service Center
for repair
Machine produces smoke
intermittently when fog
button is not pressed Turn timers off by pressing Timer
Button. Green Timer Indicator light
should not be illuminated.
Additional help and information can be found contacting Tempest.
Machine has overheated and
internal thermal fuse is blown
Machine is not turned on
Machine is in Standby mode
No power at AC cable inlet
Machine not turned on
Main fuse is blown
Machine not at
operating temperature
Fog level set to zero
Smoke output control is too low
Machine requires priming
Heat exchanger is clogged
Timer is engaged
Fluid filter above fluid line