Tempest Shadow Nightfall, Owner'S Manual

Page: 6 / 20

- 5 -
UNPACKING
Your Shadow Nightfall requires no assembly. Note: 230 volt machines are shipped with bare leads at the
end of the power cord. A proper electrical connector must be attached based on the local power require-
ments. Carefully remove the machine from the box. Ensure that no tape or packing materials are stuck
to the machine. Stray packing materials that remain attached to high temperature areas of the ma-
chine could melt or burn during operation. In particular, ensure that the area around the nozzle is free
of any materials or debris.
CONTROLS
Multi-Link Socket
3-Pin XLR socket that allows
for multiple machines to be
daisy chained together and
controlled from a single Remote
Control Panel.
Main Power Switch
Turns unit on or off by con-
trolling the flow of power
to the unit.
Air-Input / Purge Connection
This is a push-to-connect inlet that accepts ¼”OD
tubing and allows compressed air to blow through
the heat exchanger for cleaning
and maintenance.
Heat Indicator
A red indicator light that illuminates
when machine is heating in order to
achieve optimal temperature for
producing smoke.
Fluid Bottle
Ready Indicator
A green indicator light that illuminates when the
minimum temperature for producing smoke has
been achieved. Note: All indicator lights will switch
off if Standby mode is engaged.
Removable Remote
Remote Thumb Screws
Loosen to remove
Power Cable