17
Tempest MasterBelt Operating Manual
•
Volume Limit
- A minimum and maximum volume level can be set per MasterBelt or BeltStation. In loud environments a higher
minimum volume may be desirable, while in quiet environments a lower maximum volume may be preferable. Default setting is OFF for
both Min Volume and Max Volume.
•
To set a minimum volume: Press MENU, select Set Controls>Volume Limit>Min Volume and use the volume knob to adjust to the
desired level. Press ENT to save.
•
To set a maximum volume: Press MENU, select Set Controls>Volume Limit>Max Volume and use the volume knob to adjust to the
desired level. Press ENT to save.
•
Stage Announce
- The Stage Announce functionality is not applicable when using BeltStations in a MasterBelt application.
•
Call Alert
- A call alert can be used to send an audible or vibrating signal to other users’ BeltStations on the same channel. A call
signal is only sent when the originator’s TALK button is active. Press MENU, select Set Controls>Call Alert and choose either Audible,
Vibrate, Both or Disable. Default setting is Both.
•
Call Button
- The CALL button is used to trigger call alerts. Press MENU, select Set Controls>Call Button and Enable or Disable the
button. Default setting is Enable.
•
Select Relay
- The relay functionality is not applicable when using BeltStations in a MasterBelt application.
•
Relay Button
- The relay functionality is not applicable when using BeltStations in a MasterBelt application.
•
Wireless ISO
- This functionality is not applicable when using BeltStations in a MasterBelt application.
•
Volume Press
- The volume controls can be set to “Volume Press” which requires a “press and turn” action to adjust the volume
levels. This helps prevent inadvertent adjustments. Press MENU, select Set Controls>Volume Press and Enable or Disable this feature.
Default setting is Disable.
•
Talk Tones
- This is an audible tone that can be heard in the headset when the TALK button is pressed. Press MENU, select Set
Controls>Talk Tones and Enable or Disable this option. Default setting is Enable.
•
Delay Switch
- When enabled this requires the channel knobs to be pressed and held slightly longer in order to change channels.
This helps prevent inadvertent adjustments. Press MENU, select Set Controls>Delay Switch and Enable or Disable this option. Default
setting is Disable.
